- High maximum speed while maintaining low noise levels
- Smooth operation over the entire speed range
- Long life due to high demands on material selection, such as bearings, seals, etc.
- O-rings on all contact surfaces as well as double shaft seals eliminate oil leakage from the pump and power take-off
- High temperature shaft seal
HPTP 084, 108 DIN INJECTOR
HPTP DIN Optimised for Injector is an externally drained variant of the HPTP series, which offers a very high oil flow in combination with the “HPT” injector K-Jet 2.
HPTP 084, 108 DIN Optimised for Injector is suitable for hydraulic motor operations in closed hydraulic systems with injector K-Jet 2 for pressurisation of the suction side. This gives excellent speed characteristics and high flows. The pump’s front shaft seals are manufactured from fluor rubber to withstand the higher temperatures involved with engine mounting.
It is a speed-optimised pump and therefore supplied for either left (L) or right (R) rotation direction
- High maximum speed while maintaining low noise levels
- Smooth operation over the entire speed range
- Long life due to high demands on material selection, such as bearings, seals, etc.
- O-rings on all contact surfaces as well as double shaft seals eliminate oil leakage from the pump and power take-off
- High temperature shaft seal
POWER TAKE OFF
ANTI-CAVITATION VALVE
FLUSHING VALVE
INJECTOR