- High maximum speed while maintaining low noise levelsx
- Smooth operation over the entire speed range
- Long life due to high demands on material selection, such as bearings, seals, etc.
- O-rings on all contact surfaces as well as double shaft seals eliminate oil leakage from the pump and power take-off
- High temperature shaft seal
HPTP DIN OPTIMISED
HPTP DIN Optimised is a series of piston pumps with a fixed displacement for demanding mobile hydraulics.
HPTP 084, 108 DIN Optimised covers the displacement range 84 and 108 cm3/rev. at a maximum pressure of 400 bar. It is a modern, compact pump which meets the market’s high demands on flow performance, pressure, efficiency and small installation dimensions. It is either mounted directly on the power take-off or on a frame bracket via an intermediate shaft. It is a speed-optimised pump and are therefore supplied for either left (L) or right (R) rotation direction.
The pump’s front shaft seals are manufactured from fluor rubber to withstand the higher temperatures involved with engine mounting.
- High maximum speed while maintaining low noise levelsx
- Smooth operation over the entire speed range
- Long life due to high demands on material selection, such as bearings, seals, etc.
- O-rings on all contact surfaces as well as double shaft seals eliminate oil leakage from the pump and power take-off
- High temperature shaft seal
POWER TAKE OFF
ANTI-CAVITATION VALVE
FLUSHING VALVE
INJECTOR