- High maximum speed while maintaining low noise levels
- Smooth operation over the entire speed range
- Long life due to high demands on material selection, such as bearings, seals, etc.
- O-rings on all contact surfaces as well as double shaft seals eliminate oil leakage from the pump and power take-off
- The stop shoulder on the angular housing allows the pump’s direction of rotation to be changed without the risk of altering the gear meshing
HPTPT 090, 130 DIN
HPTPT 090, 130 DIN is an addition to the HPTPT series that supports larger flows and pressure up to 300 bar.
HPTPT 090, 130 DIN are ideal for applications that require both a high flow and a high operating pressure in combination with demands on small installation measurements. The pumps are either mounted directly on the power ake-off or on a frame bracket via an intermediate shaft.
- High maximum speed while maintaining low noise levels
- Smooth operation over the entire speed range
- Long life due to high demands on material selection, such as bearings, seals, etc.
- O-rings on all contact surfaces as well as double shaft seals eliminate oil leakage from the pump and power take-off
- The stop shoulder on the angular housing allows the pump’s direction of rotation to be changed without the risk of altering the gear meshing
POWER TAKE OFF
ANTI-CAVITATION VALVE
FLUSHING VALVE
INJECTOR